Product ID:M9703, MOULDED FRICTION COMPOSITE
MSDS Date:01/14/1991
FSC:3950
NIIN:00-436-3172
MSDS Number: BPTZF

RAYMARK INDUSTRIES INC MANHEIM DIVISION

123 E STIEGEL ST
MANHEIM, PA 17545-1626
US

Emergency Phone: 717-560-0748

Info Phone: 717-560-0748

Preparer: D. ALAN FLOWERS

Cage: 54201

RAYMARK INDUSTRIES INC CORPORATE HEADQUARTERS

1050 TRUMBULL, CT 06611-4724 US

Telephone: 717-665-2211

Cage: 54201

FIBERGLASS

CAS: 65997-17-3

Fraction By Weight: 5-15%

OSHA PEL 5 MG/M3 RDUST Z-3

ACGIH TLV: 10 MG/M3(<7 MICRONS)

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 6-11%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293

MICA - RESPIRABLE DUST

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: 3-7%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293

MINERAL WOOL FIBERS

Fraction By Weight: 12-20%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

PHENOLIC RESIN

Fraction By Weight: 12-24%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:TEMPORARY IRRITATION OF MOUTH,
EYES, NOSE AND THROAT. CHRONIC:POSSIBLE CANCINOGEN(IARC).
Explanation of Carcinogenicity:MANUFACTURER STATES MINERAL
WOOL,IARC-CLASS 2B.CONTINUOUS FILAMENT FIBERGLASS-CLASS 3(SOURCE
NOT SPECIFIED).
Effects of Overexposure:SKIN:TEMPORARY MECHANICAL
IRRITATION.INGEST:UNLIKELY TO OCCUR. EYES:DIRECT CONTACT WILL CAUSE
MECHANICAL IRRITATION.
Medical Cond Aggravated by Exposure:ANY CONDITION WHICH IS GENERALLY
AGGRAVATED BY MECHANICAL IRRITANTS IN THE AIR OR ON THE SKIN.

First Aid:INHAL:REMOVE FROM EXPOSURE.GET MEDICAL ASSISTANCE IF
IRRITATION PERSISTS.SKIN:USE MILD SOAP AND RUNNING
WATER.INGEST:UNLIKELY TO OCCUR. CONSULT PHYSICIAN IF UNUSUAL
REACTION IS NOTED.EYES:FLUSH WITH WATER FOR 15 MINUTES.CONSULT
PHYSICIAN IF SYMPTOMS PERSIST.

Flash Point:N/R,NON-COMBUST
Extinguishing Media:COMPATIBLE WITH WATER, FOAM AND DRY CHEMICAL.
Fire Fighting Procedures:MANUFACTURER SUGGESTS USE OF A SELF-CONTAINED
BREATHING APPARATUS IN A SUSTAINED FIRE.
Unusual Fire/Explosion Hazard:NONE REPORTED BY MANUFACTURER.

Spill Release Procedures:USE HEPA VACUUM IF DUST IS INVOLVED.
Neutralizing Agent:NONE APPLICABLE.

Handling and Storage Precautions:STORE IN A DRY PLACE.
Other Precautions:ANY FIBER OR DUST MAY BE HAZARDOUS TO YOUR HEALTH;USE
RESPIRATORS AND/OR DUST CONTROL MEASURES AS WELL AS EYE PROTECTION
WHEN HANDLING OR PROCESSING THIS MATERIAL. DO NOT INGEST.

Respiratory Protection:USE A NIOSH APPROVED NUISANCE DUST RESPIRATOR IF
TLV IS EXCEEDED.
Ventilation:USE LOCAL EXHAUST VENTILATION.
Protective Gloves:USEFUL TO REDUCE SKIN IRRITATION.
Eye Protection:APPROPRIATE WHERE DUST IS MADE.
Other Protective Equipment:LONG SLEEVED SHIRTS AND LOOSE FITTING
CLOTHING TO PROTECT SKIN.
Work Hygienic Practices:STANDARD HYGENIC PRACTICES.
Supplemental Safety and Health

HCC:N1
Spec Gravity:1.90
Appearance and Odor:DENSE GRAY SOLID COMPOSITE WITH A SLIGHT PHENOLIC
ODOR.

Stability Indicator/Materials to Avoid:YES
HMIS SUGGESTS AVOIDING STRONG ACIDS AND OXIDIZERS.
Stability Condition to Avoid:HIGH HEAT AND SOURCES OF COMBUSTION.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY GIVE OFF
TOXIC FUMES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.